Header image
Manufacturer of Priming Devices & Oilfield Specialties
  
DP SERIES / EP SERIES / HP SERIES / HP MOTOR SERIES / MP SERIES / PP SERIES
DP: PARTS / EP: PARTS / HP: PARTS / HP MOTOR: PARTS / MP: PARTS / PP: PARTS
 
HAND DIAPHRAGM PUMP
 
 

 

The Hand Diaphragm Pump
* Pumps 30 to 40 gpm and has hundreds of uses.
* For many small or intermittent pumping jobs, this high capacity hand diaphragm pump is often handier than    an engine-driven unit.
* As a portable utility pump, it can be quickly set up where it is needed - or it can be mounted permanently    for a specific job.
* This rugged unit will pump air or any liquid - including water, fuel, slurries, sewage and sludge.
* A high percentage of solids will pass through the pump without clogging or damage.
* In fact, the unit will pump anything that will pass through the hose.
* For handling liquid fertilizers and corrosive chemicals, the pump is available plastic-coated inside.


 
... ON THE FARM ... AROUND THE HOME ... IN INDUSTRY
Water livestock, fill stock tanks, pump irrigation ditches, elevator wells, shallow water wells, transfer fuel & liquid fertilizer, and prime large centrifugal pumps. Pumping out traps, cesspools, sumps, meter pits, flooded cellars, and basements. Boat bailing, washdown. Pumping out floats. Bilge pumping, afloat or ashore. Pumping out excavations, manholes, hydrants, meter pits, moving acids, and industrial wastes.

 
FEATURES
  • The molded rubber diaphragm has been tested to last numerous cycles.
  • Lightweight, solid-cast aluminum body makes it easy to carry to the job and hard to damage.
  • The handles are made of a rigid steel tubing for durability.
  • The large inlets allow for passage of many types of liquids; such as water, sewage, and mud
  • The solid aluminum fulcrum and the long steel handle gives a maximum leverage to make pumping easier.
  • The rubber diaphragm and valves makes the pump ideal for priming larger pumps.
  • Something optional is the wooden base, which provides ideal leverage for tough primes.


 
APPLICATIONS
  • Wash down of the equipment.
  • De-watering small excavations.
  • Transferring water, fuel, and other liquids.
  • Priming large centrifugal pumps.
  • Pumping out basements and sumps.
  • Bilge pumping from onboard or from dock.
TIPS & RECOMMENDATIONS
  • For longer lasting diaphragms and valves, flush the pump with several gallons of water after each use, especially after jobs dealing with corrosive chemicals.
  • Replace the diaphragms and valves that show signs of wear, cracking, or corrosion.

 
MODEL# INLET/ OUTLET CAPACITY MAXIMUM SUCTION LIFT MAXIMUM DISCHARGE HEAD APPROXIMATE NET WEIGHT
HP700 1-1/2" NPT 1/2 Gal/Stroke 20 Ft. 10 Ft. 15 lbs.
HP900 2" NPT 1 Gal/Stroke 15 Ft. 10 Ft. 18 lbs.

 
RETURN GOODS POLICY / WARRANTY / CONTACT US

PO Box 478
Bellaire, TX 77402		   5116 Elm St.
Houston, TX 77036		   Tel (713) 667-6691   Toll Free (800) 610-8670 Fax (713) 667-7867
©2000.ProtekSpecialty Co. AllRightsReserved. Made In the USA since 1946.